Business Power Solutions for Offices, Retail, and New Construction
When your business grows, your power infrastructure must grow with it. Legacy Industries delivers turnkey commercial electrical buildouts across Upstate South Carolina, North Georgia, and Western North Carolina—from core-and-shell to tenant improvements and expansions. Our certified electricians design, install, and commission code‑compliant systems that are safe, scalable, and ready for modern operations.
Why Choose Legacy Industries for Your Buildout?
| Advantage | What You Get |
|---|---|
| Commercial Expertise | Experienced project managers and electricians specializing in office, retail, healthcare, and mixed‑use. |
| Code‑Compliant Delivery | NEC‑aligned installations; clean inspections with AHJ coordination. |
| Scalable Designs | Power, lighting, and networking built for today—with headroom for tomorrow. |
| Minimal Disruption | Phased schedules, off‑hours work, and clean job sites to keep business moving. |
| Warranty & Documentation | As‑built drawings, panel schedules, labeling, and workmanship guarantees. |
Scope of Work—From Shell to Open for Business
We handle every electrical component your buildout needs, end‑to‑end.
| System | Typical Tasks |
|---|---|
| Service & Distribution | Service entrance upgrades, meter stacks, main switchboards, panelboards, subpanels, transformers, grounding/bonding. |
| Branch Circuits | Dedicated circuits for IT, POS, kitchen, break rooms, and specialty equipment. |
| Lighting | LED general lighting, accent and display lighting, emergency egress, exterior/security lighting, photometrics. |
| Controls | Occupancy sensing, daylight harvesting, timeclock/scheduling, multi‑scene dimming, centralized controls. |
| Life Safety | Exit/emergency lights, emergency circuits, ATS integration where required. |
| Low Voltage (Optional) | Structured cabling (Cat6/Cat6A), Wi‑Fi access points, device terminations, cable management. |
| Energy Efficiency | Lighting retrofits, smart controls, and high‑efficiency distribution to reduce operating costs. |
Industries We Serve
Offices & Corporate Suites
- Open office layouts with flexible power drops and modular furniture feeds
- Conference rooms with multi‑scene lighting and AV power
- Break rooms, pantry circuits, and copy/print areas
Retail & Restaurants
- Sales floor lighting and display circuits
- Kitchen and refrigeration power with GFCI/AFCI protection
- Signage, exterior lighting, and POS/network power
Healthcare & Clinics
- Exam room circuits, dedicated equipment power, and emergency lighting
- Clean installation practices and AHJ coordination
- Optional standby power integration
Industrial Flex & Warehousing
- High‑bay lighting, dock power, and conveyor/machine feeds
- Three‑phase distribution, panels, and subpanels
- Security and exterior perimeter lighting
Design‑Build or Bid—We Fit Your Project Delivery
| Model | How We Work |
|---|---|
| Design‑Build | Collaborate with owners/GCs from concept; deliver engineered drawings, photometrics, equipment schedules, and value‑engineering options. |
| Plan‑Spec / Bid | Competitively bid construction documents; coordinate submittals, RFIs, and shop drawings for a clean install. |
Lighting That Works Hard
| Area | Recommended Approach |
|---|---|
| Workstations | Even, low‑glare LED with 3500–4000K CCT; local control or zoning for energy savings. |
| Conference Rooms | Multi‑scene dimming with presentation presets; integrated task/accent layers. |
| Retail Floors | High‑CRI accent lighting for merchandising, track or linear systems with optics. |
| Warehousing | High/low‑bay LEDs with occupancy and daylight zones; aisle optics to reduce waste. |
| Exteriors | Pole lights and wall packs with photocell/timeclock control for safety and compliance. |
Power Distribution You Can Rely On
We design distribution that’s clear, maintainable, and future‑proof.
- Service entrance upgrades and AIC coordination
- Panel schedules with spare capacity and labeled circuits
- Transformers (k‑factor where required) and surge protection
- Grounding and bonding to NEC and manufacturer standards
- Clear one‑line diagrams and directories delivered at turnover
Data, Devices, and Specialty Equipment
Modern buildouts require more than outlets and lights. We coordinate with IT, AV, and equipment vendors to ensure every device powers up cleanly on day one.
- Dedicated circuits for racks and network closets
- UPS integration for critical electronics (owner‑provided)
- Special receptacles and twist‑locks for appliances and equipment
- Coordination for ovens, refrigeration, x‑ray/diagnostic loads, and compressors (where applicable)
Energy & Cost Optimization
| Measure | Result |
|---|---|
| LED + Controls | Lower utility costs; longer fixture life and reduced maintenance. |
| Circuit Zoning | Flexibility for partial floor shutdowns after hours. |
| Load Balancing | Even phases reduce losses and nuisance trips. |
| Surge Protection | Protects POS, servers, and controls from transients. |
We incorporate savings without compromising aesthetics or performance.
Safety, Codes & Inspection
Our teams work to NEC, local amendments, and OSHA safety practices:
- GFCI/AFCI protection as required
- Egress and emergency lighting with proper illumination levels
- Working clearances at panels and switchgear
- Arc‑flash and labeling awareness
- Clean documentation for a smooth final inspection
Phasing & Occupied Spaces
Businesses can’t shut down for weeks. We phase work to keep you operating:
- Night and weekend shifts available
- Temporary power and safe barricading
- Dust and debris control with clean hand‑off at milestones
- Signage and safety walk‑throughs for staff awareness
Our Buildout Process
- Programming & Site WalkClarify power needs, equipment, schedules, and constraints.
- Design & CoordinationOne‑line diagrams, device layouts, lighting plans, and vendor coordination.
- Permitting & ProcurementAHJ submittals, panel/gear ordering, fixture submittals and approvals.
- Rough‑InConduit runs, boxes, and cable pathways set with future access in mind.
- Trim‑Out & ControlsDevice installation, panel landing, labeling, and control programming.
- Testing & CommissioningCircuit verification, lighting levels, emergency tests, and as‑built documentation.
- TurnoverFinal walk‑through, owner training on controls, and warranty package delivery.
Service Areas
We deliver commercial buildouts throughout:
- Greenville
- Spartanburg
- Anderson
- Simpsonville
- Laurens
- Gaffney
- Western North Carolina
- North Georgia
Projects outside this radius can be scheduled for multi‑site clients or phased programs.
Frequently Asked Questions
How long does a typical tenant buildout take?
Most small office/retail buildouts range from 2–8 weeks depending on scope, permitting, and coordination.
Can you work from preliminary drawings?
Yes. We provide budget pricing and value‑engineering early, then finalize once plans are complete.
Do you provide as‑builts and labeling?
Absolutely—panel schedules, one‑line diagrams, circuit directories, and control maps are included at turnover.
Can you coordinate with my IT/AV vendor?
Yes. We align power locations, conduit paths, and schedules to ensure a clean Day‑1 startup.
Do you offer after‑hours or phased work?
We routinely work off‑hours in occupied spaces to minimize disruption.
Get Your Space Powered and Ready
From core‑and‑shell to open‑for‑business, Legacy Industries builds commercial electrical systems that are safe, reliable, and tailored to your operations. Our team delivers clear communication, clean installations, and on‑time turnover—so your space opens as planned and performs as expected.
Phone: (864) 431‑4670
Email: tyler.abbott@legacyind.net
Service Region: Upstate South Carolina and surrounding areas